Browse Categories

EJ-10 Multi-Input Audio Adapters

<< Previous in Audio Next in Audio >>

Price: $459.99
Item Number: EJ-10

EJ-10
Multi-Input Audio Adapters
Multi-Input Adapter with Telephone Capability (Improved Output)
List Price: $460.00



MULTI-ADAPTER MODEL EJ-10 handles virtually

The Model EJ-10 is a multi-input adapter that accepts any input signal line or speaker level input from a variety of audio/video devices, including an analog telephone. It then inserts the signal into an existing PA or music system, while providing the necessary matching and isolation protection for the sound system.

The EJ-10 provides everything required to connect a telephone, VCR, phonograph, tape player, guitar , projector, PC , CD player, DVD player, radio or other audio source, to the microphone input of a PA system. Virtually any input signal can be accommodated , required including a speaker level input of up to10 watts.

The EJ-10 is a completely passive device, no batteries or external power sources are required for operation. 

The EJ-10 features a volume control, RJ-11 modular input capability jacks, phone and phono jacks, a hum switch, and a telephone seize switch. In the telephone line mode, the EJ-10 seizes the telephone line for continuous use. An assortment of interconnect cables and a nylon pouch come attached to the unit. Basic instructions and a block diagram are imprinted on the front panel. A complete instruction manual comes stored inside a pocket of the carrying case.

Specifications:

Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unbalanced line level / Speaker level (1/8” & 1/4” mono/stereo phone, and RCA phono jacks. Tele phone line - RJ11 modular jack in accordance with FCC regulation No.E8P51E71393-VP-N; Ringer Equivalence: 0.38.)

Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transformer balanced, adjustable mic level (3’ cable with male XLR plug. Telephone line uses RJ11 modular jacks.) 

Attenuation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Line levels = -22dB to -93dB Speaker level = -53dB to 100dB Telephone = -16dB to -65dB

Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Speaker/Line = 20Hz to 20kHz Telephone= 60Hz to 3.5kHz

Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum case with a polycabonate overlay in a gray Cordura nylon pouch with zipper.

Dimensions (L x W x H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9.0” x 6.5” x 3.0”

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 lbs.

Architects’/Engineers’ Specifications: The Multi-Adapter box will accept mono or stereo line and speaker level inputs, and will allow a seized connection to the local telephone system; converting all of the signals to a transformer balanced mic level output. The adapter box must have an adjustable output control and a hum removal switch. All interconnect cables must be attached to the unit, and a padded zippered case must be provided for protection and for transporting the unit. Basic instructions with a block diagram must be imprinted on the front panel, and an operations manual must be stored in the carrying case. The size must be 9.0” L X 6.5” W X 3.0” H, and its weight should be 2 lbs. The multi-adapter box will be an Emtech Model EJ-10.

Warranty: Emtech Electronics, Inc. warrants the Model EJ-10 for a period of two years, from the original date of purchase, against defects in parts and workmanship. If a defect occurs, the unit will be repaired or replaced, at our option, free of all charges if delivered prepaid to the factory. Warranty does not extend to finish, appearance, abuse or defects due to misuse or operation under other than specified conditions, nor does it extend to incidental or consequential damages. Repair by anyone other than Emtech will void the warranty.

 


We have two locations.  124 E 5th Street Port AngelesWashington in Clallam County


We also havea  location at 97 Mountain Way Drive in Orem, Utah in Utah County. This is in the heart of the Silicon Slopes. 

We are a wholesale IT and Data Center supplier of CAT6, CAT5E, CAT6A UTP STP RJ45 patch cords, slim, snagless Ethernet, Fiber Optic Cords, and HDMI cables & more. Buy in Bulk at the Lowest Prices. Volume discounts. Make sure to come visit us in Port Angeles, Washington, a short drive from port townsend and sequim. Clallam county now has a network products supplier. Wholesale cables and B2B Business to Business networking supplies.
In Washington, we are close to cities such as Sequim, Neah Bay, Port Townsend, Bremerton, and Silverdale. Being in Washington, shipping is very quick to Olympia, Tacoma, Seattle, Redmond, Quincy, Gig Harbor, aberdeen, Anacortes, Snohomish, Arlington, King and Pierce County, Auburn, Bainbridge Island, Battle Ground, Bellevue, Bellingham, Bothell, Bremerton, Brewster, Burien, Camas, Cheney, Covington, Des Moines, Wenatchee, Edmonds, Ellensburg, Federal Way, Kenmore, Kennewick, Kent, Kirkland, Lakewood, Lynnwood, Marysville, Oak Harbor, Olympia, Port Orchard, Poulsbo, Richland, Seattle, Shoreline, Spokane, Spokane Valley, Tacoma, Tukwila, Tumwater, University Place, Vancouver, Walla Walla, Yakima and Moses Lake.
You can shop online, call, or walk in at Professional Cable. 

In Utah if you do not know about us, we are a leading supplier of networking products for IT managers and Data Centers. We are close to cities such as Logan, Ogden, Kaysville, Salt Lake City, Draper, Lehi, Sandy, Midvale, American Fork, Highland, Alpine, Lindon, Provo, Springville, Spanish Fork, Payson, St. George, Utah.

 

Product Reviews

(0 Ratings, 0 Reviews)